Things You'll Need:
- Cooling system cleaner or flush
-
Step 1
Make sure the engine is cool. Drain the radiator by removing the cap and opening the pretcock or drain plug at the base of the radiator. Close the drain plug, refill the radiator with water and run the engine until the thermostat opens and water circulates through the engine block.
-
Step 2
Let the engine cool and repeat the draining procedure. Close the petcock and refill the radiator with water.
-
Step 3
Select a cooling system cleaner or flush that is safe for your engine and radiator. Newer systems contain aluminum components that may be damaged by some cleaners. If you're not sure, consult your dealer.
-
Step 4
Pour the cleaner into the radiator and run the engine with the heater on. Follow the manufacturer's recommendations on how long to keep the flush in your engine.
-
Step 5
Drain and refill the cooling system with demineralized or distilled water. Run the engine, let it cool and repeat the process at least once to ensure that all the cleaning solution has drained from the engine.
-
Step 6
Select the antifreeze type that is recommended by your automaker. Add enough antifreeze to the radiator to achieve a 50 to 70 percent concentration. If your cooling system holds 10 liters, add 5 to 7 liters of antifreeze.
-
Step 7
Finish filling the radiator with demineralized or distilled water. Run the engine, let it cool and top off the radiator and coolant reservoir with antifreeze.
