How to Start an ATV

There are two ways to start an ATV. New modern ATVs have an electric start that makes starting the ATV easy. Old ATVs have a kick start, which requires a little more effort but is still rather easy.

Difficulty: Moderate

Instructions

Things You'll Need:

• ATV
• Gas
• Leg Power
• Charged Battery

1. 
    
   Handlebar Switch

   Ensure the ATV is full of gas, the key is in the on position and the handlebar switch is in the on position.

2. 
    
   ATV Clutch and Shifter

   Put the ATV into neutral. In order to do this hold the clutch in and kick the shifter all the way down to 1st gear. With the clutch still held, gently raise the shifter until it clicks into neutral. If you raise the shifter too much you will be in 2nd gear. You can check to make sure that you are in neutral by pushing the ATV. If it rolls freely, you are in neutral.

3. 
    
   Choke

   If you are starting the ATV cold, pull the choke out to create a rich gas/air mixture to help the ATV start easier. If the ATV engine is already warm you do not need to use the choke.

4. 
    
   ATV Kick Starter

   With an electric start you can simply hold the start button in until the ATV starts. With a kick start you need to get on the ATV and kick the starter until the ATV starts. In both situations you can open the throttle while attempting to start the ATV to give the engine more gas and help the ATV start easier.

5. Push the choke back in once the ATV is started and you are now ready to go for a ride.

Tips & Warnings

• Make sure your engine is working well and that all lubrication levels are good before trying to start it.
• Never ride an ATV without proper safety gear.