How to Make Shirred Curtains

Save

Shirred curtains are a pair of window treatments created in lightweight fabric with gathers along the top where a rod is inserted, leaving a row of ruffling. Sometimes the fabric is transparent, allowing natural light to come in but providing privacy. These curtains are often hung in kitchen windows or behind heavier draperies. The length depends on the size of the window.

Things You'll Need

  • Fabric for window sufficient for two panels Sewing machine Coordinated thread Scissors Measuring tape Straight pins Iron Tension-spring curtain hardware for window

Creating shirred curtains

  • Measure the window where shirred curtains will hang. Double the width of the window to calculate the amount of fabric to purchase. Lengthwise, add sufficient fabric for a 4-inch hem for the bottom of the curtain, as well as 6 inches to the top to accommodate 1-inch ruffles and 2 inches to insert a curtain rod. It is better to purchase a little extra than not enough.

  • Using a sewing machine and with coordinated thread to the curtain fabric, sew a half-inch straight stitch seam along both lengths of the pair of curtains to be made, wrong side in. Press the seams flat with an iron on a setting appropriate to the type of fabric used.

  • Fold the top of each curtain panel, wrong side in, about 5 inches using a measuring tape and pin with straight pins where a straight stitch will be made. Press with an iron, then straight stitch across. Measure 2 inches below that for the opening for the curtain rod to be inserted to hang in the window. Pin with straight pins, folding in excess fabric for a neat finish and straight stitch the opening closed. Press with an iron.

  • Insert the tension spring curtain rod through the 2-inch opening at the top of the curtain, gathering the fabric for even distribution, and hang in the window to see how they will look. Using straight pins, pin the bottom hem of the curtains, folding in remaining fabric for a neat finish, so that there is about a half-inch space between the bottom of the curtains and the window sill, but below the window glass. Remove the rod and straight stitch the opening. Press with an iron. Rehang the curtains on the window rod, gathering the curtains so the two panels open at the center of the window opening.

Tips & Warnings

  • If desired, shirred curtains can also have a bottom spring tension rod as well as the top rather than hang loosely along the bottom.

Related Searches

  • Photo Credit Image by Natasha Lawrence
Promoted By Zergnet

Comments

Resources

You May Also Like

  • How to Make an Austrian Valance

    Austrian valances feature a softly gathered appearance that is created with shirring tape, which forms soft, gathered folds and a scalloped bottom...

  • How to Sew Shirring Elastic

    Shirring is a technique used to gather the fullness in a piece of clothing. Using elastic thread when shirring gives your garment...

  • How to Sew Shirring Tape in Curtains

    If you are looking to update your window treatments, you might want to consider using shirring tape. Shirring tape can be used...

  • How to Do Shirring on the Sewing Machine

    Shirring produces a gathered look on fabric through evenly spaced rows of straight stitching. In the past, shirring has been created by...

  • Curtain Valance Styles

    A valance is a type of window treatment that is positioned at the top of a curtain or blind. The valance is...

  • Window Treatments for Extra Wide Windows

    An extra wide window can present a decorating challenge. No right or wrong way to treat a large window exists as long...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!