How to Change the Batteries in a Genie Remote

Hunker may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
Periodic battery changes are needed to keep your garage door remote working.
Image Credit: Manuel-F-O/iStock/GettyImages

In any given year, Genie's lineup of garage door openers encompasses more than a half-dozen different residential models, and the company offers plenty of compatible remotes that work with other garage door brands. Luckily for users, the process for changing the batteries in these remotes is one of two straightforward methods. Remotes that use coin-cell batteries use one method, while those using AA, AAA and A23 batteries use another.

Advertisement

Coin-Cell Change

Video of the Day

Like many common wireless garage door opener remotes, Genie's basic three-button and one-button remotes rely on a single CR2032 lithium coin-cell battery. To replace the battery, open the remote's case by inserting a coin into the slot on top of the device and using it to pry off the battery compartment cover. Remove the old battery and insert a fresh one, referring to the symbols in the compartment for proper polarity placement. Usually, the positive side of the battery -- marked with a plus sign -- faces up.

Advertisement

Video of the Day

Alkaline Models

Genie's Closed Confirmed remotes, which work with the Genie Network Adapter to deliver visual and audible confirmation when your garage door closes, requires two regular AAA batteries. To swap them out, simply slide off the battery cover on the back of the remote, remove the old batteries, and align the new ones with the positive and negative polarity symbols.

Advertisement

Genie wireless keypads also require batteries. Some run on 9-volt batteries while others use AA. You'll know what type you need when you open the compartment, which is done by flipping up the keypad cover and sliding the battery compartment off the bottom of the unit.

A23 Changes

The three-button remotes that work with Genie's line of Intellicode products use a special type of alkaline battery known as an A23, commonly used in alarm, keyless entry and security devices. You can track these down at most hardware stores, and changing them out is just like changing AA batteries. Slide off the battery cover on the back of the remote, remove the old battery and pop the new one in, ensuring that it's aligned according to the polarity symbols.

Advertisement

Advertisement

Report an Issue

screenshot of the current page

Screenshot loading...