Difficulty: Moderately Easy
Instructions
Things You'll Need:
- mapp gas (yellow bottle)
- torch tip
- striker or lighter
- soldering flux
- soldering wire
- sand paper
-
Step 1
First sand and clean the contacting part on the pipe and the joint,no dirt.Make sure you try fit all parts together before you start the soldering . Be sure to check and see if the pipes are relax fit and there is no pulling or stress on the pipe.
-
Step 2
Apply flux to both contacting area . Theres a flux call everflux if you using it you don't have to sand the joints . Be careful with the flux cause its an acid product it will eat at your skin.
-
Step 3
Turn on the torch and put the tip of the inner flame on the joint not the pipe , before the joint turn color start feeding solder to the joint , soon as the soldering stsrt melting , move the flame up and down and around the pipe and joint line.wipe the joint line with dry rag for clean finish
