How to Build Grind Rails

Building grind rails.

Difficulty: Moderately Easy

Instructions

1. 
   Supplys you need

   First you need to decide where you're going to put it. Then you'll need some supplies. Depending the size of the rail want. For example we'll say 10'. you'll need to buy a piece of 1" black pipe whish you can get at Lowes. You'll need two 90 degree elbows they need to be 1". And two bottom braces. You'll also need two pieces of 2' x 1" pipes.

2. Take your 10'pipe making sure it has treads at both ends of the pipe. Take your two elbows and screw one elbow on each end of the pipe making sure they are tight and they face the same way.

3. Take the two 2' pieces of pipe and screw one into each elbow facing the same way by this time it will look like a horse shoe.

4. 
   When finished

   Put your horseshoe shape facing down and screw the base plates on the ends of the two pipes making sure they are good and tight.

Tips & Warnings

• Make sure all your connections are as tight as you can get them so they don't come apart.
• make sure your base plates are big enough to hold your rail up.
• make sure to wear your safety pads and a helmet