How to Use Glue for Fused Glass

Fused glass has been fired in a kiln at temperatures as high as 816 degrees. Gluing fused glass is not a difficult process, but sometimes the glue fits the job. If you want the glass to hold tight, then try E6000. You can use a two-part epoxy and mix as needed if you do not want the hold to be absolute. Sometimes this is better if you want the joined glass to have a little give.

Things You'll Need

• Fused glass
• E6000
• Alcohol or acetone
• Possibly a Dremel tool with a diamond bit

Instructions

1. Clean areas that are going to be attached with alcohol or acetone.

2. Use the Dremel tool to rough up the connecting areas if you want the two pieces to be permanent and have a stronger hold. This will add small grooves into the glass. These grooves, or ridges, allows the glue to seep in and take better hold to the glass. Otherwise, skip this step.

3. Apply a tiny bit of glue (E6000) to the areas of choice.

4. Clamp these two parts together if possible.

5. Dry for 24 hours. The instructions may say it will be ready in a few hours, but to be safe, leave it alone for the full 24 hours.

Tips & Warnings

• E6000 is a good all-around glue. Two-part epoxy can cause problems if in heated areas for too long. This may include a house heated by a fireplace or wood stove.