How to Make Built-In Wardrobes

Save

Whether you're downsizing, upsizing, organizing or just trying to find ways to make the most of your storage problems, a built-in wardrobe can cover a multitude of bases, offering space to keep everything from clothing to linens stowed neatly for quick retrieval. Assuming you have already figured out how much space you are willing to devote to your build-out, here is a general overview of how to lay out and frame up a closet that will make short work of your storage headaches.
There are two types of wardrobe styles: the stand-alone and built-in types. These instructions cover the built-in style--storage centers constructed from floor to ceiling installed against existing walls.

Things You'll Need

  • 2-by-4 lumber
  • Jigsaw
  • Carpentry tools
  • Screws and nails
  • Drywall
  • Closet fittings (pole and pole sockets)
  • Ready-to-hang door or bi-fold/sliding doors with tracking
  • Primer
  • Paint
  • Draw up plans for your wardrobe or find blueprints on the Internet, at home improvement stores or at the library.

  • Locate electrical wiring sources in the wall before you start construction if you plan to install interior lighting in the closet. Mark the area with tape or pencil.

  • Use a pencil or masking tape to mark the locations of the wardrobe's two sidewalls and closet entry wall. Construction pros recommend making the closet at least 28 inches deep to hold standard wardrobe items.

  • Construct side walls of 2-by-4 boards in either of two ways: (a) frame up the wardrobe's side walls on the floor, then raise them into position for anchoring to the wall or (b) build the side wall frames directly onto the wall. Use more 2-by-4s to close in the three walls.

  • Mark the center of the wardrobe. To be certain everything is correctly lined up, hang a plumb bob from the ceiling marks to match up with parameter lines on the floor.

  • Nail 2-by-4s to existing flooring or subflooring and to the ceiling if the wardrobe is to have a finished interior.

  • Create a door frame on the front of the wardrobe using additional 2-by-4s.

  • Finish the interior of the wardrobe by tacking and taping precut sheets of drywall to the side and front walls and the ceiling. Cut out the section of drywall covering the electrical power source on the back wall. If a ceiling light is to be installed, cut a section from the ceiling drywall to bring the wiring into the closet.

  • Install a door. If you choose a sliding or bi-fold door(s), fasten tracks to the top and bottom of the opening before positioning the door(s) on the track. A standard prehung door will require hinges and hardware for installation.

  • Finish the exterior of the wardrobe with drywall or sand and finish the wood walls. Tape the seams before painting.

  • Determine the hanging mix of the items the wardrobe is slated to hold. Coats and dresses require more height than short garments like blouses, slacks, jackets and shirts. Install the main clothing rod by marking side walls, then attaching pole sockets to both sides. Insert the rod. Consider installing a center bracket to prevent a long clothing pole from sagging.

  • Frame up interior shelving units if desired. Cut 2-by-4s into sections to create vertical braces. Add brackets at uniform intervals and slide precut shelves into the unit. If drawers are to be installed, nail frames into place before sliding drawers into the housing. Install the lighting fixture.

Related Searches

Promoted By Zergnet

Comments

Resources

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!