How to ZIPPO LIGHTER Fill / refill with lighter fluid

Your Zippo lighter sparks but will not light. It is out of lighter fluid. These are easy to refill.

Difficulty:

Easy

Instructions

Things You'll Need

• only uns lighter fluid made of cigarette lighters
• Never use Gasoline , Kerosene, alcohol.

1. 

   Go to most any smoke shop & buy a container of cigarette ligher fluid ,In my area RONSONOL is a common brand & is the kind most smoke shops carry

2. 

   Open you ZIPPO lighter lid

3. 

   Gently pull the inner lighter out of the outer case

4. Have some paper towels handy , sometime some of the fluid spills or over flows & you need to wipe it up.

5. 

   Flip the inner lighter over & slowly fill the inner lighter fiber with fluid. This may take a little bit. because the inner fiber that holds the fluid absorbs the fluid slowly..

6. 

   Slide the inner lighter back into the outer case

7. Wipe off the lighter real good to get any spilled fluid off the lighter. Let the lighter sit open for a few minutes to let any excess fluid disopate.. now you are ready to light your lighter.

8. Alway be careful not to spill the lighter fluid. It can damage some surfaces , Never have a open flame or have a lit cigarette or lit cigar around or near the lighter fluid . I shouldn't have to say this , BUT the lighter fluid is FLAMABLE ! ! ! Witch means if will catch fire & could cause burns or could start a larger fire ! ! !