Making Lock Picking Tools
Many individuals are overwhelmed when considering making their own lock picking tools. But it's actually simple once you learn a few techniques. You can make your own lock picking tools with simple household items such as paper clips and screw drivers.
Other People Are Reading
Instructions
-
-
1
Consider using an Allen wrench. Find an Allen wrench and whittle the end down with a grinder. You want it to be small enough to fit in the key hole without fitting too snug.
-
2
Use a screw driver. A screw driver makes a good lock picking tool without any manipulation. Place the screw driver into the key hole. If it fits correctly, it should only take minimal pressure to unlock the door. If you don't have success, try a smaller screw driver.
-
-
3
Use a sturdy or plastic paper clip. Straighten it out completely. After it's straightened, make a small loop at one end. Make sure the loop is barely the right size to fit into the key lock.
-
4
Mold a straight pin into a lock picking tool. Select a straight pin and file it down with a small grinder or nail file. This will ensure you don't poke yourself when picking the lock.
-
5
Consider using a safety pin. Just make sure to file down the sharp end with a grinder or nail file to prevent injury.
-
1
Tips & Warnings
Purchase a mid-priced practice lock. When learning to pick a lock, it helps to have a lock to practice with. Make sure not to buy a cheap lock, or it may be too difficult to practice on.
Practice with the lock upside down. When learning to pick a lock, practice with the lock upside down. This makes it easier to pick, and once you've mastered this position, you can flip it over.
