Things You'll Need:
- Socket wrench and/or screwdrivers
- Needle-nose pliers
- Industrial-strength metal cleaner
- Standard metal polish
- Replacement rubber piping ends
- Replacement wooden top
-
Step 1
Remove the wooden top to the motorcycle stand using a socket wrench or screwdriver as needed. Most of these wooden tops are secured with merely two screws or bolts, so removal should be quite simple. Brush off any remaining wood particles once the top is removed.
-
Step 2
Remove any rubber ends that cover the ends of frame piping. These are usually glued on, so some prying with pliers or a flat-head screwdriver may be necessary.
-
Step 3
Use an industrial-strength metal cleaner to remove any rust and buildup that is on the frame of the stand. A wire brush can come in handy when doing this; however, when using the brush, be careful not to gouge the metal of the frame.
-
Step 4
Use a standard metal polish to give the frame shiny new life. This will bring back the beauty of the stand.
-
Step 5
Replace the rubber ends that you removed earlier with new ones. Rubber ends for many different shapes and sizes can be found at many major hardware stores. Be sure to secure the ends with epoxy glue.
-
Step 6
Replace the wooden top with a cut of new wood. Choose a wood that looks nice and complements the color of the metal. However, also choose a wood that is tough and can withstand the weight of a heavy motorcycle. Use new bolts or screws when replacing this piece.
