-
Step 1
Assemble the seat platform and foot platform (if you have not already done so) according to the manufacturer's instructions.
-
Step 2
Attach the backpack straps to the foot platform. To do so, start from the bottom side of the foot platform and insert the backpack straps up and through it.
-
Step 3
Insert the other end of the backpack strap through the loop you have created and pull it tight.
-
Step 4
Insert the loose end of the strap through the support bar at the opposite end.
-
Step 5
Place the end of the strap through the clip. Loop the strap around and through the second slot of the clip and pull it tight. Repeat for the second strap so there is one on each side.
-
Step 6
Slide the foot platform into the seat platform. The seat cushion will be on the outside of the foot platform, to serve as a cushion against your back with the back straps pulled out. The metal loops will be facing away from your back and at the bottom.
-
Step 7
Wrap the lock strap around the frame where all supports meet. Make sure the strap is connected with the cables, so everything will tighten properly.
-
Step 8
Pull the lock strap around and through the other end, wrapping it around the same part of the frame. Insert the end of the long strap through the buckle strap that is connected to the other cable. Pull the long strap until it is tight, securing the platforms together.
-
Step 9
Insert your arms into the back straps. Your tree stand is now folded, packed and ready to go.
