How to: Read Tire Date Codes

Save

The condition of the tires on a car are what determines a car's capabilities in terms of acceleration, braking and cornering. The rubber on a car tire degrades over time, and tire warranties can be tied to manufacturing dates. Every tire sold in the United States has a date code stamped on it. The date code will let you know when tires need to be replaced.

Things You'll Need

  • Flashlight
  • Use a flashlight to find the Department of Transportation code on the tire. The DOT code starts with the letters "DOT" and is followed by 10, 11 or 12 letters or numbers.

  • Record the last four numbers of the DOT code.

  • Read the last two digits of the DOT code. The last two digits are the year of manufacture. If the last two digits are 07, for example, the tire was manufactured in 2007.

    The two digits before the year indicate the week of the year that the tires were manufactured. There are 52 weeks in a year, so these two digits range from 01 to 52.

  • Remove the tire or get under the car if the DOT code on the outer side wall of the tire is less than 10 characters long. The full DOT code is required to be only on one sidewall of each tire.

Tips & Warnings

  • Tires made before January 1, 2000, had a three-digit date code. The final character was the last number of the year, while the two characters before that indicated the week of the year. There was no indication of the decade, so there is no way to tell whether a tire was made in 1997 or 1977.
  • Never get under a car supported only by a jack. The car could slip off the jack and injure you.

Related Searches

References

  • Photo Credit Stockbyte/Valueline/Getty Images
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

How To Travel For Free With Reward Points

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!