How to Make a Longbow Press
Longbows are strung and unstrung using a device known as a bow press. The easiest type of bowpress to use and to make is the stringer bow press. Utilizing nothing more than some sturdy nylon string, your own bodyweight, and proper leverage, anyone can build their own longbow bowpress.
Other People Are Reading
Instructions
-
-
1
Measure the longbow that you will be using the bow press on. Add 12 inches to this length and cut the nylon string to that length.
-
2
Tie a bowline knot in each end of the string (follow the link provided for a description of how to tie the knot).
-
-
3
Wrap a piece of leather around the inside of each loop and stitch it in place using the fishing line.
-
4
To use the press, each end of the string over each end of the bow. Stand on the middle of the string and pull the bow upward. Slide the bowstring in place and let the pressure off of the bow. Start shooting!
-
1
Tips & Warnings
Many commercially available bow presses are quite safe and inexpensive.
Do not over stress the bow by pulling to the side or twisting the limbs. This could cause damage to the bow or physical harm to you.
Resources
- Photo Credit www.lancasterarchery.com
