Things You'll Need:
- Soundproofing sheets Acoustic foam adhesive spray or staple gun Tape measure Packaging knife
-
Step 1
Measure each of the surface areas you want to cover.
-
Step 2
Head over to Sam Ash or a comparable store in your area. Buy enough soundproofing foam to cover the surface areas. Use the measurements you took to determine how much foam you will purchase. While you're there, buy some acoustic foam adhesive spray. You will need this to affix your soundproofing foam to your walls.
-
Step 3
Purchase a packaging knife or box cutter. You will need this to cut your corners to size when applying the acoustic foam.
-
Step 4
Wipe down your work surface. This will ensure that dirt and debris will not impede the adhesion of the foam to the surface where you are applying the foam.
-
Step 5
Spray a coating of adhesive to the work area and affix the acoustic foam to the work area. Repeat this process until you reach the corners of the surface area.
-
Step 6
Once you reach the corner of your work surface, measure to see if a whole block of foam will fit the area. If the foam needs adjusting, use the box cutter to cut the foam to size. If no adjustments are needed, apply the foam to the work area as usual. Repeat the process until your work surface is completely covered.
-
Step 7
Install soundproofing sheets. To do this, hang your soundproofing sheet over the first section of foam and staple it in place. You may need an extra hand for this step, but it is rather easy to do alone.
