How to Buy a Roto Star III Weld Positioner
A Roto Star welding positioner is a must-have for any welding or production shop. It helps to increase productivity and quality for various applications with minimal labor cost. It is perfect for welding and other tasks that require precision and attention to detail. Although they can be expensive, there are features that consumers must look for to get the best value for their money.
Other People Are Reading
Instructions
-
-
1
Buy your Roto Star III weld positioner from Starley Mfg., Inc. You may contact the service department if you have any questions at 1-866-204-3178. Another option is Trick Tools. Their contact number is 1-877-VAN-SANT. To visit these companies through their Websites, refer to the Resources section below.
-
2
Visit tool stores in your area or pawnshops if you want to buy a used Roto Star III Weld Positioner. You may also place a wanted ad on your local newspaper. You'll probably have even better results if you place a "wanted" ad on Craigslist under your city of residence.
-
-
3
Look for a positioner that includes the jaw chunks. Some manufacturers sell them separately and others consider them standard equipment.
-
4
Select a positioner with foot pedal and a speed control unit that is reversible. These features allow the operator to operate it with his foot while holding the piece he's working on. The armrest, although optional, helps to steady your wrist for more precise work.
-
5
Be prepared to pay about well over two thousand dollars for a Roto Star III weld positioner. However, it'll more than pay for itself since it's helpful when performing the following tasks: to position the weld piece, while grinding, for assembly work, painting, soldering, brazing, or for production work.
-
1
Tips & Warnings
The positioner can accept pieces that are 4.5 inches in outside diameter. When you reverse the jaws, it can accept pieces with an exterior diameter of up to 9.25 inches.
