How to Use Bondo for a Body Kit

Using Bondo is an easy process and is a very popular way for car owners to shape up the damaged areas of your vehicle. Once you have made the correct application your vehicle will look as good as new.

Things You'll Need

• Plastic gloves
• Breathable mask
• Drill
• Paint thinner
• Bondo
• Emory cloth

Instructions

1. Remove all rust from the intended area(s).

2. Drill holes into the areas requiring Bondo. This will give the Bondo something to “hold” onto after it is applied. The substance should actually “ooze” into the drilled holes.

3. Wipe off the area with paint thinner.

4. Apply the Bondo.

5. Allow the Bondo to dry thoroughly before sanding.

6. Sand the area with an emory cloth.

Tips & Warnings

• Do not mix the Bondo until you are ready to use it.

• The intended area needs to be sanded smoothly following the contours of the vehicle. Be careful to not use an excessive amount. This is a case where too much is not better because any extra will create extra sanding work and make more of a mess.

• After the area has been sanded, use your fingers to tell if you have filled in the area enough.

• When mixing and applying the Bondo, always wear plastic gloves and a proper mask. Bondo is a lead-based resin and, while safer than using body solder, it can still pose some serious health risks.