How to make a wheelchair ramp

Building a wheelchair ramp can be challeging but here goes.

Difficulty: Moderately Challenging

Instructions

Things You'll Need:

• A 2x8 at least 36" long.
• 2 2x6 length depending on doorway or porch.
• 2 2x4 length depending on doorway or porch.
• 12 deck boards,treated. 36" long.
• A box of 2 1/2" wood screws.

1. 

   Your 2x8 will screw into front or back door.

2. 

   Your 2x6's you will cut at a 45 degree angle will screw into the 2x8.

3. Your 2x4's cut at a 45 will screw 2" down on the inside of the 2x8.

4. 

   and your 36" deckwood will go across depending on how many you'll need this will be your walkway at least a 1" and half apart. Make sure all screws are counter sinch.

Tips & Warnings

• If you live in a apartment with a concrete foundation, it will be 2" off your front porch or your walkway, just cut 1 2x8, 10ft long,cut it at a 45, all the way down the center, they should both be the same size.
• Always make sure the ramp is stable and anchored in the ground, measure 32" across and get a piece of decking plywood cut the bottom at a 45 and lay on top, drill your holes and put screws in.