How to Make a Mirrored Wall Hanging

If you want to make a room look bigger, add a mirror. That's an old saying. While that statement is still true, there are many ways of adding the mirrored look to a wall or room. From mirrored mosaics to wall hangings, there are many possibilities. Here is a fast, easy and inexpensive way to add a mirrored wall hanging to your decor.

Difficulty: Moderate

Instructions

Things You'll Need:

• Mirrored wall tiles
• Plywood squares
• Black high gloss paint
• Acrylic clear high gloss sealer
• Permanent epoxy
• Mosaic tiles
• Red ribbon
• Glitter fabric paint
• Paint brushes
• Drill
• Glue

1. Cut plywood squares to measure 2 inches larger than your mirrored tiles on all sides. This will give you a 2 inch border around your tile once in place. Paint the boards, front and back, with the high gloss black paint. Let the first coat dry and add another. For a finishing touch, add acrylic sealer. Let dry overnight.

2. Drill 1 hole in the upper 2 corners of plywood. This will give you a place to string the ribbon used for hanging your tiles.

3. Mix the epoxy. Once mixed according to directions, apply epoxy directly to the back of the mirrored tiles. Place immediately on the wood panel and center it as desired. In the wall hanging pictured above, the mirrored tiles were centered on the wood panel backing. However, the tiles can be placed in any direction and according to your design. The epoxy will dry relatively quickly, but it should be allowed to harden overnight before you hang it up.

4. 
    
   Mosaic tile design on hanging.

   Glue the red,white and black mosaic tiles on your hanging. Use your epoxy to do this according to your design. The design shown placed the tiles in the corners of the mirror. Be sure to slightly overlap the tile to make sure it is incorporated in your project. Using glue (with the strength for hanging projects), attach cut pieces of ribbon between the sections of tiled design. Using the red and gold glitter paint, highlight the ribbon by running a stream of color to each side. If desired, use a small amount of black high gloss paint. Draw an symbol onto the middle of the glass.

5. Attach ribbon after all parts of the wall hanging have set and are dry. Tie a knot in the end of the ribbon, and feed it through the holes in your board. Feed it through the second hole and tie another knot. When pulled tight, the ribbon will hold the hanging.

6. 
    
   Mirror Wall Hangings can reflect any decor

   Make 3 mirrored hangings to reflect the proper design element. Use the additional mirrored tiles to add extra features to any other room. Change the color of paint and mosaic components to change the look of your piece and keep it in touch with your room's decor.

Tips & Warnings

• Add a touch of epoxy to the knots on the ribbon hanger to keep it from pulling loose.
• Don't do this project around small children. The sharp edges pose a serious safety hazard.