eHow launches Android app: Get the best of eHow on the go.

Click Here
How To

How to Troubleshoot the Cooling System in a Mercury Cougar

Contributor
By eHow Contributing Writer
(0 Ratings)

Diagnose cooling system problems by understanding how the system works. In simple terms, coolant picks up heat when it goes through the engine and releases heat in the radiator. Cooling devices function by circulating antifreeze, containing it or controlling its temperature. Troubleshoot the cooling system in a Mercury Cougar by inspecting cooling system devices. Team up with a mechanic for these steps that apply to most model years.

Difficulty: Moderate
Instructions
  1. Step 1

    See if your water pump is leaking. The water pump pushes coolant through the engine, radiator and heater core. A faint antifreeze smell or spots of coolant under your Cougar when parked for a short time indicate a worn out water pump.

  2. Step 2

    Look for cracked, collapsed, leaking or dry hoses. Check upper and lower radiator hoses, heater and bypass hoses and manifold coolant hoses. Your upper hoses for instance, measure about 2-inches wide and carry coolant between the radiator and engine. Damaged hoses lead to cooling system problems.

  3. Step 3

    Check the antifreeze amount. Overheating and other cooling problems can result from low coolant levels. In this case, put antifreeze mixture in the expansion tank reservoir. Your reservoir is located on the passenger side of the engine. This location applies to the 2.0L and 2.5L EFI-engines.

  4. Step 4

    Drain and flush the cooling system to help diagnose cooling system problems. Make certain to dispose drained antifreeze properly because the coolant's sweet smell attracts animals and small children. Ingesting the poisonous liquid can be deadly.

  5. Step 5

    Inspect the radiator cap for signs of wear and tear. For example, a damaged cap could show corrosion. Ask a mechanic to use a pressure tester or an adapter to inspect the cap's pressure rating and operation. Promptly replace a defective cap.

  6. Step 6

    Wash and gently scrub the front of your radiator. When you drive, dirt, rocks, leaves and other debris suck into the fins of your radiator causing overheating. Clean it with soapy water, a soft nylon brush, and a garden hose to rinse.

  7. Step 7

    Test the thermostat for sticking. A couple of ways to pinpoint a stuck thermostat include constant low temperature readings or peaks between high and normal temperatures. Your thermostat, the spring-loaded valve that reacts to coolant temperatures, is usually located inside the housing on the engine side of the upper radiator hose.

Comments  

tyrants said

Flag This Comment

on 12/8/2008 I put a new thermostat in my 1993 cougar and noticed there wasnt one even in there. Now the engine is overheating even worse. Any ideas?

Subscribe

Post a Comment

Post a Comment

Related Ads

Local Listings
  • Have you done this? Click here to let us know.
I Did This
Get Free Cars Newsletters

Copyright © 1999-2009 eHow, Inc. Use of this web site constitutes acceptance of the eHow Terms of Use and Privacy Policy.   en-US Portions of this page are modifications based on work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License.

eHow Cars
eHow_eHow Cars