Things You'll Need:
- Jack and jack stands
- Screwdriver
-
Step 1
Release the parking brake to the lowest position. Raise your Plymouth Neon rear wheels with a jack and support each back wheel with a jack stand.
-
Step 2
Get underneath the vehicle on the inside of the rear wheel wells. Locate the rubber plug in the adjusting hole and take it out.
-
Step 3
Insert a screwdriver into the adjusting hole to adjust the star wheel adjustment. On the driver's side, use the screwdriver to adjust the star adjuster downward until you feel tension in the wheel. On the passenger side, use the screwdriver to adjust the adjuster star upward until you feel tension in the wheel.
-
Step 4
Move the star wheel adjustment upwards on the driver's side to where the rear wheel spins freely. On the passenger side move the star wheel adjustment downwards until the rear wheel spins freely. Rotate the star wheel adjuster two more clicks on both rear wheel adjustments.
-
Step 5
Place the rubber plugs back into the adjusting hole on both rear wheel wells.
-
Step 6
Press in on the parking brake two times with releasing. Make sure that the rear wheels spin freely still.
-
Step 7
Lower your Plymouth Neon using the jack and remove the jack stand supports.
