How to Replace the Front Signal Lights in a Chrysler Town & Country

There is no reason to drive your Chrysler Town and Country van without working signal lights when they are so easy to replace. All you really need is the correct replacement bulb for the year of your Chrysler van and a few minutes.

Things You'll Need

• 3167NA signal light bulb

Instructions

1. Go to the front tire closest to the turn signal light that you are going to replace. Bend down and locate the round access door, a little larger than the size of your fist, in the front part of the tire's fender well or wheelhouse.

2. Push in the door slightly and then use the grip molded into the plastic access door to rotate it counter clockwise to remove it. Set it aside for a moment.

3. Look inside the access door. You'll see the turn signal socket just a few inches away. Reach in and twist out the light socket out by hand counter clockwise. Remove the turn signal bulb from the socket. Simply pull it out and discard.

4. Replace the bulb with light bulb number 3157NA, which can be purchased at any auto parts store, unless your owner's manual says to use another bulb for your van's model year. Reinstall the socket back in by twisting it back in place.

5. Reattach the plastic access door. Start the van and switch on the turn signals to make sure that they work.

Tips & Warnings

• Hold the new bulb with gloves or near the base of the bulb. The oil from your hands will reduce the bulb's lifespan.