Difficulty: Moderately Easy
Instructions
-
Step 1
Make sure your router is plugged into electrical outlet and receiving power.
-
Step 2
On the back side of router you will see a small hole not much bigger then a grain of sand.
-
Step 3
In this hole there is a small button that can be reached with a paperclip or pencil.
-
Step 4
Hold down button for 10-15 seconds until you see status lights go off then on when you are looking at the front of router.
-
Step 5
You have now reset router and all settings have reverted to factory default. Then factory default IP is usually 192.168.1.1. You can find more specifics on this at www.linksys.com
