How to Replace Ink Cartridges on an HP Business Inkjet 1000 Series Printer
HP Business Inkjet 1000 Series Printer uses four separate ink cartridges—black, magenta, cyan and yellow, allowing for the greatest efficiency in ink usage. Operators need only replace the color cartridge that is empty. The printer is also smart enough to warn you when an ink cartridge is running low, so you never get caught in the middle of a print job and run out of ink. The cartridges are easily accessible and they can be replaced quickly to allow you to get back to work.
Things You'll Need
- HP Business Inkjet 1000 Series Printer
- Appropriate Replacement Ink Cartridges
- HP No. 10 Black C4844A
- HP No. 13 Black C4814A
- HP No. 11 Cyan C4836A
- HP No. 13 Cyan C4815A
- HP No. 11 Magenta C4837A
- HP No. 13 Magenta C4816A
- HP No. 11 Yellow C4838A
- HP No. 13 Yellow C4817A
- Plastic Bag
Instructions
-
-
1
Insure the printer is turned on. If the printer is not already on, press and release the power button located on the left hand side of the control panel to turn the power on.
-
2
Observe the ink cartridge color indicator lights. Note which color ink cartridge needs to be replaced. Raise the printing supplies cover, located on the right hand side of the printer, to its fully opened position.
-
-
3
Grasp the ink cartridge that you wish to replace between your thumb and forefinger. Pull the cartridge straight up. Place the empty cartridge in a plastic bag. Set the bag aside for disposal or recycling.
-
4
Remove the replacement cartridge from its packaging. Insert the new cartridge into the appropriate, color-coded slot. Press the cartridge firmly into place to insure proper connection.
-
5
Lower the printing supplies cover to its closed position. Press the "Resume printing" button, located on the control panel.
-
1
Tips & Warnings
The ink cartridge light on the printer will blink and one or more color indicator lights will come on when the corresponding ink cartridge is low. Pressing the "Resume" button will allow you to continue printing.
The ink cartridge light, color indicator light and "Resume" light will all remain on when the corresponding ink cartridge is out of ink. The cartridge must be replaced before printing will resume.
Manufacturer’s warranty will not cover any damages caused by modifying or refilling ink cartridges.
Manufacturer’s warranty will not cover any damages caused by using non-HP ink cartridges.
Resources
- Photo Credit http://h10003.www1.hp.com/digmedialib/prodimg/lowres/c00285279.jpg