That old light socket just doesn’t work any more. It clashes with your decor, and it’s time for a new one. You just saw the perfect one in a lighting store and decided you must have it. You don’t want to pay an electrician nor do you want to get zapped by electrical wires. Changing a light socket is less complicated than you might think. In fact, any "do-it- yourselfer", with the right precautions can switch out a light socket in just a few minutes.
Things You'll Need
- Step Ladder
- Screw Drivers
Turn off the electricity from the breaker box. Check the switches to make sure. Once you are absolutely certain that the power to the switch has been turned off, and that there is no chance that an unwitting person might turn it back on while you are working, then you may proceed.
Use a step ladder to stand on, remove the encasement, if any from the socket and place it carefully aside. It’s best to climb down the ladder to place it somewhere safe rather than trying to balance the casing, which is usually brittle glass, somewhere on the ladder. For extra safety, retrieve the light bulb before continuing.
Use a screw driver or wrench, depending on what is required, to unfasten the light socket from the ceiling. You will know it is unhooked when the socket is dangling by wires. Pay special attention to how the wires go together. Write it down if you have to. It’s important.
Unhook the wires from each other to remove the socket completely. Keep the wire nuts if any, as you can use them to install the new socket. If there are none, you will want to get some before re-installing. Sometimes electricians are not as careful as they should be, and while another person installing the previous light may have opted out of wire nuts, you will want to take the necessary safety precautions to get it right.
Retrieve your new light socket and attach it all in the reverse direction as you took the old one off. After attaching the wires and before attaching the new socket to the ceiling, put a light bulb in the new socket and turn the power on. Check to make sure the light turns on and off with the switch. Providing that it works properly, turn of the power, take out the bulb, attach the socket to the ceiling, reinsert the light bulb and put on the new casing if any. Only when you have completed all of these steps should you turn the power back on for a final light check.
Tips & Warnings
- There you have it. May your new light socket illuminate your family time for years to come!
How to Replace a Fluorescent Light Socket
Replacing a fluorescent light socket is not difficult. All you need is a screwdriver, a new socket and these few tips to...
How to Replace a Lamp Socket
Sometimes you need to change a lamp socket either as an upgrade or to replace a faulty or old socket. This is...
How to Change an OTT Light Bulb
OTT brand lights are used widely by crafters, artists, seamstresses and other hobbyists. OTT light bulbs bring a superior quality of lighting...
How to Change a Brake Light Bulb on a Nissan Quest
Checking the brake lights in your Nissa Quest is an important maintenance step that many people take for granted. It's difficult for...
How to Keep Light Bulbs From Sticking in Sockets
Nothing is more frustrating than when you go to change a lightbulb and the old one seems to be stuck in the...
How to Change a Wall Socket
Changing a wall socket--when it has cracks or will not hold a power cord--is not difficult. Because you are working with 120...
How to Replace a Three-Way Lamp Socket
Flickering light or failure to illuminate properly are telltale warnings that a lamp socket is beginning to fail. If your three-way socket...
How to Replace a Dodge RAM Tail Light Bulb
Bulb replacement is a routine automotive maintenance task. Every vehicle's owner's manual contains a listing of the bulb numbers and colors needed...
How to Change the Rear Break Lights on the Hyundai Veracruz
The Veracruz is a large crossover SUV sold in the United States by Hyundai Motors. The Veracruz was introduced to the U.S....