How to Replace a Fuel Pump in an Acura Integra

Save

The Acura Integra has an electric fuel pump, and yu should ensure that its fuses and relays are working before checking it. You may need to clean your fuel pump or replace it if your gas tank isn't empty, but your vehicle has difficulty getting fuel. The Acura Integra comes in various styles and trim levels that can affect the replacement fuel pump you choose.

Things You'll Need

  • Fuel pump kit
  • Shop towel
  • Socket wrench
  • Torque wrench
  • Determine which fuel pump your Acura Integra will need. This depends on the make, model and the engine size. Models built from 1985 to 1988 have a 1.6 L engine, 1989 to 1993 models may have a 1.7 or 1.8 L engine and models manufactured after 1993 will have a 1.8 L engine.

  • Relieve the fuel system pressure. Remove the kick panel under the dash and take out the PGM-FI main relay that controls the fuel pump. Disconnect the negative battery cable, start the engine and run it until it stalls.

  • Access the fuel pump by taking out the rear seat and removing the maintenance access cover. Unplug the fuel pump's electrical connection.

  • Remove the fuel pump by holding the connector for the fuel line in one hand while pressing down on the retainer tabs with the other. This will allow you to pull off the connector. Cover the connector and pipe with plastic and have a towel handy to soak up excess fuel. Unscrew the mounting nuts for the fuel pump with a socket wrench and remove the fuel pump.

  • Install the new fuel pump using the items included in the kit, especially the retainer. Use a torque wrench to tighten the mounting nuts for the fuel pump to 53 in. lbs.

  • Complete the installation by reversing the removal procedure.

Related Searches

Promoted By Zergnet

Comments

Resources

You May Also Like

Related Searches

Check It Out

How To Travel For Free With Reward Points

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!