How to Replace the Taillights in a Dodge Durango


Even though your Dodge Durango is a rugged and burly SUV, it still needs maintenance to run its best. Although they should last for years, your Durango's taillights can burn out or crack. Replacing these on your own saves time and money, and it's a task that doesn't require any mechanical experience.

Things You'll Need

  • Flathead screwdriver
  • Replacement taillight bulb
  • Open your Durango's rear liftgate and look for the back of the taillight housing assembly.

  • Remove the two fasteners from the taillight housing assembly using a flathead screwdriver or a dull knife. Twist the assembly away from the inside of the vehicle to remove it from its notch.

  • Unlock and remove the electrical connector from the back of the light.

  • Unscrew the bulb strip from the back of the light. Put the screws in a container so you don't have trouble finding them when you put the assembly back together.

  • Pull the defective bulbs straight out of their sockets.

  • Replace the bulbs, refasten the bulb strip and reconnect the electrical wiring to the light.

  • Press the taillight assembly back into position and secure it once more with the fasteners.

Tips & Warnings

  • Your Durango needs #3057 replacement bulbs. Other bulbs probably won't fit, unless you can construct a custom taillight housing to hold them.
  • Engage the emergency brake for added safety during maintenance.
  • Don't attempt to replace the taillights without turning your Durango's engine off first. You could get electrocuted if you keep it on.

Related Searches

Promoted By Zergnet



You May Also Like

Related Searches

Check It Out

How To Travel For Free With Reward Points

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!