How to Replace Windshield Wipers in a Honda Prelude
From 1978 until 2001, Honda manufactured the Prelude, a sporty, two-door coupe. In order to ensure good visibility while driving your Honda Prelude, you're going to want to replace your windshield wipers if they become dull or damaged. You can use the Trico wipers to make the replacement in your Prelude.
Other People Are Reading
Instructions
-
-
1
Order the wiper replacements for your Honda Prelude. You can find Trico Exact Fit wipers from the site Car Stuff. For a Honda Prelude manufactured between 1990 and 2001, you're going to buy the 16-inch size.
-
2
Find the tab in the center of the Prelude's wiper blades. You're going to use the release feature of the adapter to remove the old wiper blades. Squeeze the tab and then slide out the wipers you need to replace.
-
-
3
Turn the new wipers that you have purchased upside down. Position the curved end of the new wipers so that you can push it into the adapter. You're going to keep pushing until you hear a click. You'll then know that you have locked the new wipers into place.
-
4
Start your car. After you have secured the wipers to the windshield, you can test them out. Spray your windshield with wiper fluid in order to check how well they remove the liquid without leaving behind streaks.
-
1
Tips & Warnings
Remember to prep your car for wiper installation. Keep the car off and the wipers vertical while you work on the Prelude.
The manufacturer recommends that you replace both the driver and passenger side windshield wipers at the same time.
