Many designers believe that plaster walls display a subtle smoothness and depth that drywall cannot equal. While common to many older homes, plaster has also enjoyed a revival in popularity within newly constructed buildings -- as a thin coating for sheetrock and as a green design option that involves lime plaster or clay plaster. Whether the plaster is newly installed or generations old, modern homeowners can beautify their walls with user-friendly, water-based paints.
Before You Scrape
Plaster walls in homes built before 1978 may contain residual lead-based paint, which the U.S. Environmental Protection Agency (EPA) regards as a serious health hazard. Do not scrape or disturb old painted surfaces until you have used an EPA-recognized lead testing kit to confirm that the walls are lead free. These inexpensive kits are available at paint stores, hardware stores and home center outlets. If the test reveals the presence of lead, contact a certified lead abatement specialist or your regional public health department.
Smoothing Wounded Walls
Plaster walls in older homes often display small dents, dings, cracks and nail holes that must be filled or smoothed over before a new coat of paint can be applied. Gently scrape off any loose or flaking plaster with a putty knife. Any small holes and indentations should be filled with spackling compound. The excess material should be wiped off using a putty knife until the surface is uniformly smooth. If the hole is somewhat larger, the patch can be reinforced with mesh. The wall should then be primed with a white-pigmented shellac primer or an alkyd-based stain-blocking primer.
Preparing New Plaster Walls
Newly installed plaster walls should not be primed or painted until the material has dried completely -- this usually takes about one month. Gently rough up any shiny or uneven areas with a sanding block, then remove the dusty residue with a tack cloth. The wall can then be primed using a stain-blocking primer, such as a film-forming water-based primer. For greater protection, an alkyd primer or white-pigmented shellac primer penetrates into the plaster surface and forms a tough, protective film for the topcoat to adhere to.
Applying a Quality Paint
For best results, apply an acrylic latex paint using a high-quality synthetic fiber paint brush. Or, use a paint roller that's equipped with a 1/4 to 3/8 inch roller cover. A flat or matte finish paint will help conceal any surface flaws on older plaster walls. An eggshell or semi-gloss paint will provide a washable surface for newer plaster that also resists abrasion and scuffing. In most cases, you can apply a second coat of paint two hours after applying the base coat. Check the manufacturer's directions for exact re-coat times.
- Photo Credit Martin Poole/Digital Vision/Getty Images
How to Paint Over Waxed Venetian Plaster
True Venetian plaster has a depth, transparency and glass-smooth texture that is nothing short of breathtaking. There is no mystery as to...
How to Repair Plaster Walls Before Painting
Painting over plaster can enhance the look of the plaster, accenting the workmanship that went into the plaster application. Before painting though,...
How to Paint Textured Plaster Walls
Before manufactured drywall became widely available, interior walls were often constructed from lath and plaster. Home builders nailed small wood strips to...
How to Paint New Plaster
Painting some surfaces doesn't require priming or other extensive prep work. Fresh plaster surfaces, however, almost always need proper conditioning before painting....
How to Paint Over Old Plaster
It's not overly difficult to splash new paint on old plaster. However, a new paint job won't hide plaster problems. When painting...
How to Paint & Plaster Over Wallpaper
Mention "stripping" and "wallpaper" in the same sentence and you're bound to hear groans. It's a messy, difficult job. However, there might...