How to Remove Rust From a Steel Boat Without Sand Blasting

The steel on your boat is in constant contact with water and will inevitably rust. Sand blasting is one method that works well to remove rust on your steel boat, but if you are not willing to sand blast there are alternate methods of rust removal, including the use of naval jelly.

Difficulty: Moderate

Instructions

Things You'll Need:

• Wire brush
• Soap & Water
• Naval jelly
• Oil-based paint

1. Use a wire brush to remove all of the loose rust.

2. Wash the surface that you are going to be cleaning with soap and water. Work the surface in a circular motion and dry thoroughly after cleaning to make sure that all loose rust is removed.

3. Apply the naval jelly with an applicator to the rusted surface once the it has been prepared. Naval jelly will remove the paint on your boat.

4. Allow the naval jelly to penetrate the rusted surface for 10 minutes.

5. Rinse off the naval jelly with a thick wet towel. Dry the surface with a dry towel.

6. Repaint and protect your boat from further rusting. After the use of naval jelly it is recommended that you use an oil-based paint.

Tips & Warnings

• If the rust stain is still present you may want to repeat the steps.
• Do not leave the naval jelly on the boat for longer than 15 minutes.

Who Can Help Sponsored

• Tired of Being Tired? Fight Fatigue and Try FRS for FREE!