How to Replace a Light Bulb in a Solar Lamppost


You have a solar lamppost, and it seems to have stopped working. It could be the bulb has blown. There is a way of replacing the bulb without buying a new lamppost. This article will tell you how to replace that bulb and save money in the long run. When you are finished with this article, you will be able to replace the bulb and have that lamppost working again in no time.

Things You'll Need

  • New bulb for solar lights
  • Soldering iron
  • Solder
  • Screwdriver
  • Solar lamppost
  • Gather all the items necessary to perform the project. With the screwdriver, remove the screws from the top of the lamppost and locate the bulb.

  • Pull the bulb gently to expose the wires it is attached to. These wires may be solid wires, soldered wires or capped wires. If they are solid wires, use a pair of wire cutters to cut the wires just below the bulb itself. If they are soldered wires, use the soldering iron to heat the solder and pull the wires apart. If they are capped wires, simply unscrew the caps and pull the wires apart.

  • Plug in the soldering iron and allow it to heat up to operating temperature. In the meantime, open the new bulb. This bulb should look exactly like the one you are replacing.

  • Hold the new bulb in one hand along with the solder. Make the 2 ends of one wire meet. Solder them together. The bulb should now be attached by one wire. You should be able to release the bulb and it stay in position. Now make the other 2 wire ends meet and solder them together.

  • To test your bulb, simply place something over the solar sensor of the lamppost. The light should come on. Replace the top of the lamppost and screws. Your lamppost is ready for use.

Tips & Warnings

  • Make sure the new bulb is exactly like the one you are replacing. To assure this, you may want to remove the old bulb first and take it with you to purchase the new one.
  • Make sure you test the batteries before replacing the bulb.
  • Do not replace the old bulb with a larger wattage or voltage bulb. This can cause the lamp not to work.

Related Searches

Promoted By Zergnet


You May Also Like

  • How to Replace the Bulb in Landscape Lights

    Landscape lighting bulbs have to fight the elements. There are so many elements that can cause them to lose their brightness and...

  • How to Repair a Lamppost

    Lampposts that are installed outdoors and exposed to the elements can start to develop rust over time. When a lamppost has rusted...

  • How to Replace Solar Light Batteries

    Solar lights use batteries to keep the lights going at night when there is no sun. The solar panels within the light...

  • How to Make Lamps With Solar Lights

    Solar lamps save energy and lower your electricity costs through sun-powered batteries. These lights absorb sunlight during the day and turn on...

  • How to Change a Light Bulb

    Light bulbs come in all shapes, sizes and types. From incandescent bulbs found in most light fixtures and lamps to high-pressure sodium...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!