Things You'll Need:
- Poulan wild thing chain saw
- 1 gallon of fresh, unleaded gasoline in a marked, approved container
- 1 3.2 ounce container of synthetic 2-cycle engine oil
- Rags or paper towels
-
Step 1
Insure the engine of the Poulan Wild Thing chain saw is turned off. Allow the engine to cool. Move the chain saw to an outdoor location. Be sure the location is free of combustible materials, such as leaves, paper and dry grass.
-
Step 2
Remove the lid from the container of unleaded gasoline. Set the lid aside. Remove the lid from the 3.2 Oz. container of synthetic 2-cycle engine oil. Set the lid aside. Pour the engine oil into the container of gasoline. Replace the lid on the oil container and dispose of it in an approved trash receptacle.
-
Step 3
Replace the lid on the container of gasoline. Shake the container of unleaded gasoline and oil for a few moments to achieve a good mixture. Wipe up any spilled fuel with a rag or paper towel. Dispose of the rag or paper towel in an approved trash receptacle.
-
Step 4
Set the Poulan Wild Thing chain saw on its right side with the fuel cap up. Remove the fuel cap by turning it counter clockwise. Set the cap aside.
-
Step 5
Remove the cap from the container of gasoline and oil. Set the cap aside. Pour the fuel from the container into the fuel tank on the chain saw until the fuel reaches the desired level. Replace the cap on the fuel container. Replace the fuel cap on the chain saw and tighten it securely. Move the chain saw at least 10 feet from the fueling site before starting.
