How to Build an Ionic Air Cleaner

Ionic air cleaners help to clean the pollutants from the air, making the air more healthy to breathe. This is especially a concern for people who suffer from respiratory ailments like asthma.

Instructions

Difficulty: Challenging

1. Use an EHT power source when building an ionic air cleaner so you can produce the "required electrical entities." The generator should be able to convert a lower voltage AC into a higher level of DC power.
2. Implement diodes to cause polarity in the system of the ionic air cleaner.
3. Connect capacitors of varying magnitude in a series, and use resistors on the output circuits so you will get action through them.
4. Use component leads to wire the capacitors and the diodes synchronously to create the system of the ionic air cleaner, then place them into a box of your choice to form an ionic air cleaner.
5. Attach the input to the IEC inlet, and the output to the EHC socket.
6. Fill the ionic air cleaner with waxes and substances like grease to prevent ionization from forming inside the air cleaner. Implement fuse circuits and ground wires.
7. Create an ionic breeze at the sharp point hole because of the high "charge density." Embed a configuration made of alloy near the sharp point hole so you can prevent degradation and deterioration in the ionic air cleaner. Install an ion emitter in the output socket, and also solder some copper wires in there are well.

Who Can Help:

• Find Local Cleaning Services Here. Compare Up to 4 Quotes, Free Service & No Obligation.
• Find Contractors Here. Compare Up to 4 Quotes, Free Service & No Obligation.
• Find Landscaping Design and Installation Services Here. Compare Up to 4 Quotes, Free Service & No Obligation.