Things You'll Need:
- screwdriver set,no.7 mm nut driver,wrench
-
Step 1
There is a kit that comes with all manufactured stoves. The kit is attached to the underside of the oven cavity. Remove the kit and look at the instructions, They will tell you which color orifice goes to which burner
-
Step 2
color coded orifices that are installed in each top burner assemblyRemove the orifice from the burner and install the new ones
-
Step 3
gas regulator located under stove coverNow remove the cap from the gas regulator and flip it over then reinstall it
-
Step 4
Now look inside the oven you will see the main burner tube at the point of entry there will be an adjustable orifice, With a wrench turn the orifice clockwise until it bottoms out
-
Step 5
If the oven is equipped with a broiler you will need to do the same to the broiler orifice
-
Step 6
hook up the gas stove and turn the gas on. Most new stoves have electronic ignition so you don't have to light a pilot just turn the knob and the flame lites













Comments
724speedy said
on 12/4/2008 good pressure but I have no oven that works
acole said
on 7/21/2008 Interesting & Informational.