Things You'll Need:
- a multi tool, rag, hammer
-
Step 1
-remove barrel band
-loosen screw found at the bottom of the riffle
-once loose the barrel and reciver should slide out
-make surre there is no magazine -
Step 2
-use a screw drive to remove driving pins
-once pins are out you should be able to remove the triggar system which will expose the bolt
-take out remaing pin you will need a screw driver and hammer
-once the pin is out slide back the bolt and lift up -
Step 3
-clean the bolt using rag, water, then once bolt is dry lubricate and reasemble









Comments
wilandot50 said
on 7/26/2008 This is a dangerous article that should never have been posted. Spelling:D-, Accuracy F--. As a gunsmith, no one who is not qualified should ever dis-assemble/re-assemble a firearm. If you have the manual, and the parts diagram, and proper tools,AND SOME PREVIOUS TRAINING, then proceed carefully. Firearms are precision instruments and improper re-assembly can cause accidental dischage with potentially FATAL CONSEQUENCES.