How to Carve a Turkey

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
How to Carve a Turkey.
Image Credit: kobeza/iStock/GettyImages

Things You'll Need

  • 2 large cutting boards

  • Long, sharp knife with pointed tip

  • Carving fork or large fork

  • Kitchen towel

  • Large platter

Carving a turkey isn't rocket science, but even a moist, perfectly roasted turkey can seem a bit chewy or stringy if you get it wrong. To serve tender, neat portions of turkey, it's important to detach each section at the joint and then slice against the grain. This process is easiest when you carve each section in a certain order, using both a carving knife and your hands to separate the pieces. If you're not sure about the bird's anatomy, you should be able to find a turkey diagram with a quick internet search.

Advertisement

Step 1: Set the Carving Board

Place the turkey on a large cutting board with the breast side up. Have a second cutting board standing by to slice individual sections of the turkey. If you'll be serving right away, have your serving tray or a large plate nearby to receive the finished slices.

Video of the Day

Step 2: Remove the Legs

Pull the leg and thigh section away from the turkey until you feel the joint pop, using your carving fork or the back of your knife. Cut down through the joint that connects the thigh to the carcass, and use your knife and carving fork to transfer the leg to your other cutting board. Rotate the bird 180 degrees on your cutting board, and emove the other leg-thigh section in the same manner as the first.

Advertisement

Step 3: Carving the Thighs

Separate the drumstick from each thigh by cutting down through the joint between them. You can use the tip of knife to probe for the joint if you are not sure where it is. Slice the thigh meat by cutting parallel to the bone, and arrange the slices on a platter. If you are serving the skin, you may find it easier to slice the skin separately and serve it on top of the sliced thigh meat.

Advertisement

Step 4: Carving the Drumsticks

Stand the leg up vertically on the cutting board and slice downward along the bone to remove the leg meat. Pull out the fine bones and tough ligaments that connect to the bottom of each muscle, then ransfer the slices to youe platter. Alternatively, you can serve the drumsticks intact.

Step 5: Carving the Wings

Pull the wing away from the body to expose the joint. Remove the wing by cutting through the joint that connects the wing assembly to the breast. Remove the other wing in the same manner, and place both wings on the second cutting board. Cut through the joint connecting the "drumette" to the flat of the wing, and transfer both halves to the serving platter. You can remove the wingtips if you like.

Advertisement

Step 6: Carving the Breasts

Remove the breasts by slicing down along each side of the center breastbone until you hit the rib cage. Use your hands to peel the breasts away from the rib cage, and then run your knife along the bone to remove the breasts from the carcass. Transfer each breast in turn to the second cutting board. Slice the breasts crosswise, so you're cutting against the grain. Arrange the slices on the platter with the other pieces.

Tip

Before you start carving, let your turkey rest for at least 20 minutes. The rest period helps keep the turkey juicy and allows it to cool slightly for easier handling.

Kitchen counters are a better height for carving than your dining table, so it's easier to set up your cutting boards on your counter than carving at the dinner table. You'll have better leverage, and probably a bit more elbow room as well.

Advertisement

Video of the Day

references & resources

Report an Issue

screenshot of the current page

Screenshot loading...