How to Install a Kitchen Island Receptacle
Install a kitchen island receptacle to add even more convenience to your kitchen. Kitchen islands serve as work preparation areas and stages for other appliances. Add a power supply to these handy fixtures guarantees using the steps below. Does this Spark an idea?
Other People Are Reading
Things You'll Need
- Kitchen island receptacle
- Saber saw
- Power drill
- Conduit
- Armored cable
- Support bracket
- Cable connector
- Utility knife
- Wire connectors
- Insulated screwdrivers
Please enter your 10 digit phone number only.
A link to this article has been sent to the phone number provided.
Instructions
-
-
1
Use the saber saw to cut a hole in the cabinet location for the kitchen island receptacle. Place the electrical box in the whole. Tighten outside screws.
-
2
Determine the location for the power cable. Use the drill to make a hole in the cabinet floor. Cover the cable running from the electrical box to the floor with conduit.
-
-
3
Insert the armored conduit into the hole in the floor. Run the cable between the service panel and inside the conduit. Use the support bracket to fasten the conduit to the cabinet.
-
4
Add the cable in the box with the cable connector. Remove the sheathing and insulation from the cable using the utility knife.
-
5
Attach the white and black wires to the matching screws of the receptacle. Use the wire connectors to connect the grounded wire between the circuit cable and grounding pigtail. Fasten the opposite end of the pigtail to the grounding screw in the box.
-
6
Secure the cable wires inside the box. Cover with the receptacle and screw the box ears in. Return the cover plate to the receptacle. Check to see if the circuit power goes on.
-
1
