How to Measure Wind Speed


Measuring wind speed is important in weather forecasting, and in particular the forecasting of hurricanes and tornadoes. The Beaufort scale is used to illustrate the speed of wind at any particular time in terms of knots.

Things You'll Need

  • Anemometer
  • Weather vane
  • Doppler radar
  • Use a weather vane. This is a device that measures the direction and speed of wind. If you install a weather vane at the top of a building, it will point in the direction away from where the wind is coming from and will spin around based on how hard the wind is traveling. The faster the vane spins around, the stronger the wind is said to be.

  • Buy a modern anemometer. This is a device that works similarly to a weather vane, except with a heated wire. When the wind gathers strength, the wire becomes hotter. The temperature of the wire then tells the electronic device how strong the wind is traveling.

  • Look at your local Doppler radar. The National Weather Service uses a Doppler radar to inspect the air velocity and the doppler shift. This tells viewers how fast the wind is blowing.

  • Lick a finger and stick it in the air in the direction the wind is coming from. Golfers, football kickers and other sports professionals use this technique to determine the wind speed. The more quickly your finger dries, the harder the wind is blowing.

  • Watch how hard flags are blowing. When flags are barely moving, the wind is virtually nonexistent. When flags are completely erect and firm, the wind is blowing hard.

Related Searches

Promoted By Zergnet



You May Also Like

  • How to Calculate Wind Speed

    Calculating the wind speed is a simple experiment that can be done with a few materials. This experiment will step you through...

  • Wind Measuring Instruments

    Measuring the wind is an essntial activity and ability for sailors and aviators. As wind greatly impacts the safety and navigation abilities...

Related Searches

Check It Out

How to Make a Vertical Clay Pot Garden

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!