-
Step 1
Visit your local hobby shop or do your shopping on-line and buy a bottle of theatrical clear liquid latex. It is a durable rubbery substance when cold but when warmed it melts down to a liquid, which can be formed into virtually any shape through the use of plastic molds.
-
Step 2
Test a spot of skin about the size of a quarter to find out if you are allergic to the latex. Keep it in place for twenty-four hours to see if there is any reaction. If not, then it is safe to use this product on your skin. If you are applying the product to someone else, the same rule applies. Always test the skin first for any sensitivity or rash.
-
Step 3
Warm the latex and pour an amount into the plastic mold tray that is sufficient to cover the entire mold. Whether you want a bullet hole, a scar or a festering scab, you will be able to find a mold to fit your needs. You can also apply the latex directly to the skin while still in the liquid state, wait a moment and mold it with your fingertips into the desired shape. By doing it that way, glue is not needed, although touch-ups with glue will still be required later on.
-
Step 4
Once the latex form has cooled and hardened you need to gently slip it out of the plastic mold. Be careful doing this as latex is stretchy but is also easily torn if handled too roughly. Think of it as the same consistency as the skin of a balloon. You can only blow a balloon so big and then it will pop. Liquid latex is the same way. If you don't like the way your latex appliance has turned out, simply stuff it back into the bottle and melt it down again for a second try.
-
Step 5
Apply the latex to the skin with makeup appliance glue, making sure that the glue itself does not cause an allergic reaction. Apply the glue on every part of the piece that comes in direct contact with the skin, and it should stick fast but is easily removed by simply peeling the latex piece off and washing with soap and water to remove the glue.
-
Step 6
Coat the latex piece and the surrounding skin with the same color cream makeup. This will help to blend in the edges of the latex piece with your own natural skin. Then add blood effects if needed and the added touch of bruising around the area, using the colors, purple, blue, yellow and green blended together. This should thoroughly disguise any edges that might be spotted by the theater audience.
