How to Fill in Burn Holes in a Carpet


No matter how large or small the burn hole in your carpet is, you can easily repair it with a little time and knowledge.

Things You'll Need

  • Chalk
  • Utility knife
  • Vacuum
  • Glue
  • Examine the burned area carefully to determine how much of the carpet must be replaced. You need to replace an area that is slightly larger than the burn hole. Use a piece of white chalk to draw your cut lines around the damaged area.

  • Locate a scrap of carpet left over from installation if you have one. If you do not have any carpet scraps lying around, you can take a scrap from an area that is not noticeable. A good place to take your patch from is the back corner of a closet.

  • Use a utility knife to cut along the chalk markings. Separate the pile of the carpet with the fingers on your opposite hand so you are cutting the backing of the carpet only and not the pile fibers.

  • Remove the damaged piece of carpet. Vacuum excess dirt and debris from the hole that you left behind.

  • Take the damaged piece of carpet that you removed and lay it on top of your carpet scrap. Take care to line up any patterns in the pile of the carpet, and then draw around the outside edge of the damaged piece, using it as a pattern to create a duplicate replacement piece. Cut along the drawn lines.

  • Place the replacement piece of fabric in the hole where you removed the damaged piece. Secure it in place using hot glue, carpenter's glue or carpet adhesive.

  • Inspect your repair to make sure the seam is not visible. If the seam is showing, glue a few pieces of carpet fiber in place to conceal the seam.

Tips & Warnings

  • Consider buying a carpet repair kit that come with an assortment of colored fibers and everything else needed to complete carpet repairs.
  • If the burn spot on your carpet is on the surface only and has not burned all the way through, try shaving the burn off before doing a patch repair. Use a razor blade and lightly shave the top of the fibers. This works best on shag and other high-pile carpets.

Related Searches

Promoted By Zergnet



You May Also Like

  • How to Fix Burns in Berber Carpeting

    A burn in your Berber carpeting can be disheartening and frustrating -- especially if the burn occurs in an area where people...

  • How to Repair Burnt Carpet

    Burnt carpet can be unsightly. Don’t spend a lot of money hiring professional carpet repair. If you accidentally burned your carpet, you...

  • Shag Carpet Do It Yourself Repair

    Shag carpeting usually requires more upkeep and care than tighter yarns. However, the longer yarn lengths allow shag carpet to hide a...

  • How to Repair a Burn Mark in a Carpet

    Carpeting without stains or other damage is attractive floor covering in your home and feels soft to your feet. However, you carpet...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!