How to Replace a Turntable Belt

Many music enthusiasts prefer the sounds of a turntable as opposed to more modern musical devices, such as the tape or C.D. player. Unfortunately, standard turntables are difficult to find in electronic retailer stores - mainly due to steadily decreasing demand in the market place. The belt of the turntable is a key component that enables the record to spin and ultimately become audible. However, turntable belts begin to wear over time and eventually become unusable.

Things You'll Need

• Proper turntable belt

Instructions

How To Replace a Turntable Belt

1. Locate the proper turntable belt for your particular machine. Remember, each piece of equipment differs in quality, parts used, and size. You may run into a problem when you replace the belt if you purchase one that is incompatible with your machine.

2. Remove the metal clip that keeps the platter in place. Often, the clip will either unscrew or need to be pressed together for removal. If you are uncertain of exactly how to remove the metal clip, simply consult your machine's manual or search via the Internet.

3. Apply slight force to remove the platter. This will expose the inner-workings of your turntable. Ignore most of what you see, as the only part you need to touch is the belt.

4. Locate the belt. It should be wrapped around the motor and the lower portion of the turntable's platter. You may need to use slight force in order to remove the belt - especially if it is warped.

5. Remove the new belt from its package and place it on the motor and the platter.

Tips & Warnings

• Make sure that the length of the belt is correct. The length of the belt provides the correct amount of torque to the turntable, which allows the record to play at the correct speed.

• Do not touch any of the inner-workings of the turntable besides the belt.