How to Fix a Sink Drain
A common problem for homeowners is a clogged sink. Repairing a clogged up sink can add up to hundreds of dollars per year. With simple steps you will be able to fix a clogged sink drain on your own and save money. Does this Spark an idea?
Things You'll Need
- Wrench
- Rubber Plunger
- Liquid drain remover
- Auger
- Plumber's tape
- Plumber's putty
Please enter your 10 digit phone number only.
A link to this article has been sent to the phone number provided.
Instructions
-
-
1
Inspect your sink. Remove food particles in kitchen sink or soaps and hair in bathroom sink.
-
2
Use a rubber plunger to pump up the clog. The water should drain down after a couple of big pushes.
-
-
3
Use a liquid drain solution if the plunger technique doesn't work. This is especially helpful if you have grease or accumulated gunk in your drain. Pour the liquid drain solution according to manufacturer's instructions. Don't use the sink for a couple of hours. Once a couple of hours has passed, the water should start to drain as the clog dissolves.
-
4
Turn the faucet on to clean the remaining dirt off the sink before it starts building up in the drain. Let water run for 10 minutes to completely rinse the pipe.
-
5
Remove the trap if the previous steps prove to be unsuccessful. Make sure to place a large bucket or pan to catch water drain before you start removing the trap to prevent water spilling on your cabinet base. Using a wrench, slowly loosen the slip nuts on either end of the trap. Keep one hand on the trap to keep it from popping off unexpectedly.
-
6
Clean the dirt that accumulated in the trap.
-
7
Reassemble the trap using the wrench.
-
8
Put a plumber's tape or putty to seal the trap to prevent any leakage.
-
9
Insert an auger into the pipe going into the wall if you do not see the clog in the trap or the pipe leading from the sink. Remove the clog using the auger. Once you have successfully removed the clog, re-assemble the trap and seal with plumber's putty or tape.
-
10
Do a final test by running water. Check for any leakage and adjust or seal as needed.
-
1
