How to Join Kitchen Worktops

Save

Joining kitchen worktops is a must when you have two mitre tops or you have a long run and must seam two tops together. You may join kitchen worktops together in several ways, depending on the situation. A router is the best tool for this job. You may also need wood blocks.

  • Use a router when you join kitchen worktops. Slide the two tops together. Mark 3 or 4 lines on the bottom side across each worktop. Now, turn your worktops over and cut a T into your worktops. Use a ½-inch router bit. Make the T about 1 inch deep into your worktops.

  • Get some tie-bolt fasteners to hold your worktops as you work when you join kitchen worktops. These fasteners have a bolt with two flat, wide washers. One slides over the bolt end and one screws onto the threads of the other end. This bolt takes a 7/16 open-end wrench to tighten.

  • Apply caulking in between the joints of the kitchen worktops when you join the two tops together. Caulking acts as a glue and a water sealant so water won't penetrate the raw edges when you join kitchen worktops.

  • Attach wood blocks to the underneath area of your worktops. These wood blocks must be 1-inch wide by 6 inches long. Glue and nail the wood blocks 1/8 inch back of your cut areas on each side of your worktops. Leave a ½-inch gap so you may insert your tie-bolts. Let these blocks dry thoroughly before you put your tie-bolts in your ½-inch slots (or gaps). Then, tighten your tie-bolts. This secures your two worktops together.

Related Searches

Promoted By Zergnet

Comments

You May Also Like

  • How to Cut Laminate Worktops

    Laminate worktops continue to be a popular choice for kitchen countertops. They are durable and come in a wide range of color...

  • How to Cut Kitchen Worktops

    If you're building a new home or remodeling your kitchen, you must cut kitchen worktops for appliances such as stoves, surface units...

  • How to Fit Kitchen Worktops

    Installing kitchen worktops includes fitting your stove opening correctly. Your worktops must fit against your walls properly so that the job finishes...

  • How to Miter Cut Countertop Corners

    Making a 45-degree angle in a countertop creates a corner in the counter. When these two pieces meet together, they make a...

  • How to Join Two Bolts

    The need to join two bolts together is common in construction and renovation projects. You can join any two externally threaded bolts...

  • How to Join Crown Molding

    Working with crown molding in very large rooms may require the cutting of a 45-degree angle to join and extend the crown...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!