Frugal minded people find ways to utilize even the smallest of spaces. Not limited to the kitchen or bath, a corner cupboard adds unique décor to any home. It is also a versatile cupboard in that its uses range from storage to display. However, building a corner cupboard requires some previous woodworking knowledge. These instructions are for a display cupboard not requiring a door.
Measure the walls from corner out to determine the depth of the cupboard. Then, measure the height and record all the measurements.
2
Draw results from Step 1 on the ½ inch plywood and cut them out. Miter the front edge of the side panels at a 45-degree angle.
3
Determine the number of shelves you want for your corner cupboard. Draw them on the ¾ inch plywood and cut them out.
4
Space the shelves as desired and secure them to the side panels with the 1 ¼ inch screws. Measure and cut two 1-by-2 inch solid wood pieces for the height of the frame and miter one edge on a 45-degree angle.
5
Place the shelves on the cupboard to ensure a good fit. Measure the space between them and cut two pieces of the 1-by-2 inch wood for the top and bottom of the cupboard frame.
6
Glue the 1-by-2 inch frame pieces to the cupboard and secure them in place with the 4d finish nails. Set the nails with a nail set. Let the glue set up over night.
7
Secure the corner cupboard to the wall with 2 ½ inch screws. Use a level to plumb the cupboard to the wall.
Tips & Warnings
Drive nails only to the face of the frame. Use a nail set to drive them below the surface of the frame.
Always wear safety glasses.
If you want to add a door, cut a piece of ¾ inch plywood that's ¾ inch larger than the frame opening (width and height). Attach the door to the frame with hinges.
Use support blocks when hanging the cabinet on the wall.
Don't raise the table saw blade higher than you need for the cut.
A corner cupboard can be an elegant and space-saving addition to any kitchen cabinetry installation. Corner cupboards are often installed before the...
Constructing a kitchen cupboard requires basic building skills and attention to detail. Careful measuring and using correct materials will ensure the cabinet...
