How to Install Cabinet Drawer Pulls
Installing new cabinet drawer pulls is one of the quickest and easiest ways to change the look of a piece of furniture, a bathroom or a kitchen. Pulls come in so many shapes sizes and varieties, they're a great way to add interest and flair to any room. Plus, it's very simple to install cabinet drawer pulls. You only need a few tools and a few minutes. Does this Spark an idea?
Other People Are Reading
Instructions
-
Install Cabinet Drawer Pulls
-
1
Decide the location on the drawer where you want to install the cabinet drawer pulls. For most drawers, the very center is the best place to install the pull, but choose the spot that looks best and is most convenient for you.
-
2
Measure the spot where you want to place the drawer pull. If you want to place the pull in the very center of the drawer, then measure the length of the drawer and place a small pencil mark in the center. Then measure the height of the drawer and place another pencil mark in the center. The pencil marks should overlapMeasure a second time to be sure your first measurements were accurate.
-
-
3
Drill a hole for installation of your new drawer pulls. Using the pencil marks you made in Step 2, drill a hole all the way through the drawer.
-
4
Attach the drawer pull.While holding the drawer pull, push a screw all the way through the drawer from the back.When the screw meets up with the pull begin using the screwdriver to turn the screw into the receptor in the drawer pull. Tighten the screw and enjoy your new pulls.
-
1
Tips & Warnings
Choose a location for the pull at least one inch away from the edge of the drawer to avoid weakening the drawer front by drilling too close to the edge.
Always measure twice. It's better to spend a minute longer measuring than to drill a hole in the wrong spot.
