How to Repair a Jacuzzi

Unwinding at night in a jacuzzi is most people's idea of a great evening. Unfortunately, purchasing a jacuzzi to enjoy at home is a major investment. No one wants to come home and get in their jacuzzi to find it won't turn on. After spending a good bit on a jacuzzi, no one wants to spend needless amounts of money on repair cost. There are a few do-it-yourself tips that can save you a lot.

Difficulty: Moderately Challenging

Instructions

Things You'll Need:

• Screwdrivers
• Needle-nose pliers
• Multimeter

1. Make sure the jacuzzi is plugged in. Check the circuit breaker. It would be embarrassing to call a maintenance man for something that simple.

2. Test fuses. Often times a blown fuse will prevent the whole jacuzzi. Replacing a fuse yourself is much cheaper than calling a maintenance man.

3. Inspect the GFCI unit. This is done by checking to see if the GFCI stays set. If it doesn't, disconnect from control. If it still doesn't stay set, it is either the internal wiring or GFCI. If it the GFCI remains set, simply reconnect each load separately until the GFCI trips again. The load that causes the GFCI trip is the faulty unit.

4. Look at the high limit contactor. This is a safety switch that remains closed unless there is a problem with high temperature. Reset it if tripped. If it happens again, check flow-through heater manifold. You may need to move the manifold from the element. Before replacing the high limit, check the valves and filter element.

5. Check power at blower receptacle. If there is power, check the cord for damage. Replace if necessary.

6. Be sure that the timer is set to "off" and the thermostat is fully counter-clockwise. Select time "clock mode."

Tips & Warnings

• Make sure to do proper maintenance to keep your jacuzzi in best condition and catch problems before they get big.
• Due to the delicate wiring, do not attempt any repairs that you are not qualified for. You do not want to make the problem worse.

Resources

• Spa Depot