Things You'll Need:
- Cordless Window Shade
- Carpenters Level
- Measuring Tape
- Shade Brackets and Screws
- Pen
- Drill
- Screwdriver
-
Step 1
Determine if your cordless window shade will be mounted on the inside or outside of your window framing.
-
Step 2
Read the instructions that are packaged with your shade to determine how to position the brackets for your installation.
-
Step 3
Test if your mounting surface is level by holding your carpenters level against the mounting surface (usually the inside upper surface of the window trim or the outside surface of the upper window trim). If the mounting surface is not level, you must ensure that you install the brackets so that the shade will hang level.
-
Step 4
Measure and mark the position for the first bracket. Refer to the instructions to ensure proper bracket placement. Hold the first bracket in place and mark the center of each screw hole with a pen.
-
Step 5
Drill a starter hole for each screw.
-
Step 6
Hold the bracket in place and use a screwdriver to install the bracket screws.
-
Step 7
Repeat steps four through six for each remaining bracket. Depending on the length of your shade, you could have two to four brackets to install.
-
Step 8
Slide the shade into the brackets as indicated in the instructions.










