How to Reattach Sink Plumbing Fixtures
If you have purchased a house that has had the sink plumbing fixtures removed, you are going to want to replace them. The very first thing you are going to want to do is measure the space for the sink, as there is no standard size. Next, you will need to measure the drain and water pipes. You also need to make sure that you purchase the appropriate sizes, so you don't have to make multiple trips to the hardware store. Does this Spark an idea?
Instructions
-
How to Reattach Sink Plumbing Fixtures
-
1
Make sure the water is turned off.
-
2
Place the sink into the space provided. The kitchen sink will rest on the edge of the counter.
-
-
3
Wrap Teflon thread tape around the top of the drain.
-
4
Drop the drain into the drain hole in the sink. Tighten it from below.
-
5
Wrap Teflon tape around the bottom threads of the drain.
-
6
Attach the trap to the bottom of the drain and tighten with an adjustable wrench.
-
7
Place the faucet into the holes in the sink. Be sure there is Teflon thread tape around the thread located on the bottom of the sink.
-
8
Screw the hoses onto the bottom of the faucets. Make sure they are tight.
-
9
Turn on the water.
-
10
Check for leaks. If there are any leaks tighten the connection. Be sure to run water into the sink to make sure the drain is sealed properly. Make sure there are no leaks on the top or bottom of the sink.
-
1
Tips & Warnings
Plastic pipes are the best to work with. If you have iron pipes, make sure they are not rusted through. If they are, you may end up replacing more than you bargained for.
