How to Use Profiling Router Bits

One of the easiest ways to make fine edges on a piece of wood is to use profile router bits. These bits come in a variety of profiles, and some require setting up a guide. Some of the bits have a ball-bearing wheel that allows the router to use the edge of the wood as a guide.

Difficulty: Moderate

Instructions

Things You'll Need:

• Router
• Bits
• Safety glasses

1. Insert the bit into the router and tighten.

2. Adjust the height of the router plate to the desired profile.

3. Measure from the edge of the bit shank to the edge of the plate.

4. Set the guide at the measurement taken in step 3.

5. Start the router and place it against the guide. Move the router in the opposite direction of the router motor.

Tips & Warnings

• Do not move too fast since this may cause splintering of the edge.
• Always wear safety glasses.
• Operating the router from the wrong direction may cause damage to your project. Test the direction on scrap wood.