How to Pick Tools Needed for Pottery

When initially working with clay and learning the art of pottery, many amateur potters make the mistake of going out and buying all kinds of shaping tools. Such tools are only really needed by the time your finished works are of a smooth and professional look. Until then, you can make do with pens, pencils, and plastic forks, knifes, and spoons. For those who believe themselves ready to advance to the next level of this ageless art, here's a brief explanation of the most used potter's tools and what to look for when buying them.

Difficulty: Easy

Instructions

1. 
   Quality loop tools

   The loop tool is a simple metal loop set into a handle. Depending on the shape of the loop they can be used for cutting swaths from a finished clay pot for large designs or uniformly thinning the pot's walls. They are also available with thin, malleable wire but the stainless steel loops tend to last longer. Also people often have the option of choosing between double ended loop tools with stainless steel handles or single ended loop tools with finished wooden grips. Go for the wooden handles as they are easier to clean and their larger size grants a greater degree of control over the tool.

2. 
   Double Ended Ribbon Tools

   Ribbon tools are used by potters for medium-duty cutting, shaping and slicing. They use the same stainless steel ends as the loop tool, simply on a smaller scale. Also because of their smaller size, where the end of a loop tool may when being used to deal with the contours of the item being sculpted, a ribbon tool will stay rigid and cuts more deeply. It's less common to find a single ended ribbon tool, so don't try as it will simply lead to a great deal of frustration. Often they are sold in kits with many ribbon tools having different shaped heads for different tasks. They can all prove to be useful and are cheaper when in kits, so it's probably best to buy them as such. Stainless steel handles can be cleaned by scrubbing them in hot water more easily than wooden ones, having no grain to collect dirt and clay. But because of that inherent grain, wooden handles make the tool easier to hold and manipulate. The choice is up to you.

3. 
   Wooden potter's ribs

   A potter's rib, often simply called a rib, is a simply shaped tool, usually wood, that is used to manipulate or alter the shape of any vessel being thrown on a potter's wheel. They work in a manner similar to a woodworker's lathe, shaping or stripping the clay dependent on the angle of the tool and how much pressure is applied. Usually they are found in two shapes, kidney and rectangular. The kidney shape helps smooth edges, pushing round indentations into the vessel. The rectangular shape is used to scrape off excess clay or push sharply angled indentations into the vessel. Traditionalists still use wooden ribs, but they can be found made out of various metals, and plastics. Some have even been seen made from stone. In my opinion the easiest to hold rib is made from wood, but the rib that's easiest to clean and can round edges the smoothest is made from Teflon.

4. 
   Ideal needle tool

   The needle tool is a long, thin heat-treated steel needle used to make a clean smooth cut with a minimum of drag when removing the uneven top edge of thrown items. The width of the needle is crucial, too thick and the needle pushes clay aside rather than cuts through it. Too thin and the needle fails to pull through the clay, potentially bending or breaking the needle or chipping pieces out of the top of your thrown item. One that is slightly smaller than the average nail you might use to hang a picture frame is acceptable for most situations. The needle itself should have a pointed sharp tip. If such a needle dulls over time (though this is unlikely) simply stroke it lightly across a whetsone, giving the handle a quarter turn after each stroke. Handles come in plastic, wood and stainless steel in different widths. Any of the materials works just as well as this tool need not be handled with the same skill as the others. What you would want to take into consideration is the width of the handle. They range from slightly thinner than a pencil to as thick as a piece of rebar. The larger a person's hands, the larger the handle would need to be to feel comfortable.

5. 
   Examples of Modeling Tools

   The purpose of a modeling tool is less to cut or remove clay from the work or sculpture as to push it into place, create fine detail, and smooth over the rough edges. This tool is not used in pottery a great deal, but it's the clay sculptor's best friend. A smooth-edged butter knife will work just as well when you're starting out. A dull number two pencil will work as a stylus for finer detail. They are comparatively cheap and easy to find, coming in plastic, wood, and metal of lots of different shapes. The metal modeling tools have a tendency to cut into the clay rather than push it into place and I would not recommend them. Plastic tools are more resilient and can withstand more pressure that wooden ones without splintering. They're also heat resistant so they can be thrown into the dishwasher for cleaning, whereas a wooden modeling tool would likely split.

Tips & Warnings

• Before you spend the money to purchase all these tools, look around the house for items that would work just as well. You'd be surprised how many normal household implements have unforeseen uses.
• Using potter's ribs requires a still and the steady application of light pressure, misuse of this tool on a potter's wheel can result in flying clay in all directions and light injuries to the work hand.

Resources

• A good pottery tool site